Last week we showed you the Holger Pullover we started as a store sample, but I wanted to show you the other sweaters in the PetiteKnit Holger family (yes, there’s a family of Holgers). What can I say, they’re funky and fun, but the construction is fairly simple, which keeps your hoop-jumping down to a minimum. Plus, PetiteKnit is a reliable designer, so I feel like you’re getting a good quality pattern that will work out.
One thing to to note about the kids sweaters (the Holger Pullover and Holger Cardigan) is that they are oversized, and the larger sizes can fit a small to medium size woman (the finished size for the largest is 42.5″).
Holger Cardigan
It’s just like the Holger Pullover, except it’s a cardigan! Strap that kid into a cute sweater and button them in. The Holger Cardigan is worked in the round in one piece, with the sleeves picked up in the round and knitted down – that’s right, no seams!
The Holger Baby Set is a sweet version of the pullover sweater of the same name, worked up in a thinner weight yarn (plus it comes with instructions for a matching pair of pants). Like the other member of it’s family it’s worked in the round from the top-down, then the sleeves are picked up and worked in the round.
I kind of really enjoy the colour combination of the green Holger Sweater Man, I figured out the colours below. It reminds me of the very best of the 80s, the ebullient parts. Over the years the needle has nudged and it’s now common for men to wear colourful socks with all kinds of designs on them, so I feel like there is hope for humanity and room for the needle to move a smidge more and allow for colourful, striped sweaters (for everyone). If you want inspiration for a Holger Sweater in more restrained neutral colours (like the baby set above) you can troll instagram, I’m sure there’s room on this planet for a restful colour palette too.
The adorable Holger Sweater by Petite Knit is our next store project … thank you Erica! It’s a super adorable knit, I love the graphic stripes and bold colour blocks – they’re lively and fun and inspire lots and lots of play and amusement. This particular version of the pattern is sized for toddlers and kids, and the sweater sizing seems to be oversized and is designed to fit loosely. Be sure to take a look at the finished measurements when you’re choosing a size.
The Holger Sweater is worked from the top down. The body is worked in stockinette stitch with stripes, while the sleeves and neck edge are each worked in a different solid color. First, the back yoke is worked back and forth with the slope of the shoulders being shaped using short rows and in stripes, which are worked at the same time. Each shoulder is then worked back and forth on a circular needle, and then the shoulders are joined to form the front yoke. The front and back yoke are joined at the underarms to form the body, which is worked in the round on a circular needle with stripes. The sleeves are worked down from stitches that are picked up and knitted around the armholes. At the end, a folded neck edge is worked from stitches that are picked up and knitted along the neckline.
Sophie is a simple shawl that’s knit horizontally, from tip-to-tip. It’s a quick, easy knit thats great for little projects …. perfect for travelling or patio season. It calls for a worsted eight yarn, but we tried it out with Berroco Vivo, a textured, DK weight, 100% cotton, just to play around and see what would happen. What happened was a really pretty, light little spring/summer wrap
Size
We made a size medium and I feel like it turned out as more of a scarf than a wrap (I had an uncertain amount of yarn on hand and I wasn’t sure how far it would go). We only used 1.22 balls (or 330m) of Berroco Vivo, and I feel like it turned out a bit small as far as wraps go, so if I made another I’d go up to the largest size. If you are using Berroco Vivo you will likely not use as much yarn as is recommended in the pattern, it seems to have gone further than expected.
Our Finished Sample: Size Medium – 13″ (33cm) deep, 101″ (252cm) long
Pattern Size: S (M) L
Pattern Length from tip to tip: approx. 170 (210) 240 cm or 67 (82¾) 94½ inches
Easily Change the Size
Because the pattern is knit from side-to side, its really easy to just knit until you’ve used up half of your yarn, then start the decreases. Just be sure to weigh your yarn before you start, so you know how much is you half-way mark (I use an inexpensive digital kitchen scale from Amazon). If you want you can also make your shawl larger than the largest size, you just need to start your decreases later.
Thank you Erica for knitting up this beautiful shawly/scarfy thingy, the Sophie Shawl by PetiteKnit. It’s a great design because it’s deeper in the middle, where you need more coverage, but narrower at the edges, where you don’t, making it a really wonderful fall/winter/spring garment! It’s a simple knit, mostly garter stitch with an attached i-cord edge that keeps it looking pretty and elegant (a simple technique, definitely not a dealbreaker if you’ve never done it).
I don’t know why I chose the purple … it was a momentary intuitive choice. Am I manifesting a colour trend? If you have any insight, please let me know!
Notes
We made the size medium, but used a bit more yarn than the pattern required and we had to dip into an extra ball of mohair, so if I was to do it over again I’d just level up to a size Large.
Size
Our finished measurements (size M): 82″ (213cm) long from tip to tip, 14.5″ (37cm) deep at the middle):
Sizes: S (M) L
Length from tip to tip: approx. 170 (210) 240 cm 67 (82¾) 94½ inches
Width at center: approx. 28 (34) 38 cm 11 (13½) 15 inches
Just in time for spring and International Women’s Day, Erica (goddess of the yarn & needles) finished a Hipster Hat from Petite Knit in one of the gorgeous new colours of Sandnes Garn Double Sunday (colour 4626). The yarn is soft and spongy with lots of body and memory and keeps the shape of the hat & the ribbing beautifully! I steam-blocked it really easily it and it just popped into its final shape. The colour is delicious … I really needed a hit of colour for Spring!!!!
Thank you to all the women who make all the things happen …. I am grateful.
The Hipster Hat
The Hipster Hat is worked bottom-up in a 2×2 rib stitch. The bottom has a folded edge of about 6 (6) 8 (8) cm [2¼ (2¼) 3¼ (3¼) inches] (you can do a double folded edge if you knit the hat extra-long, but bear in mind that this will require more yarn than suggested). The decreases at the top of the head are done by working 2 sts together on each side of two knit sts a total of 4 times across the round. The Hipster Hat can be knit a bit long for it to get a little “hipster top” or to a length where it fits your head snuggly. The Hipster Hat is for both men and women.
Size
baby (child) woman (man)
head circumference of approximately: 45-48 (48-53) 53-57 (57-60) cm [17¾-19 (19-20¾) 20¾-22½ (22½-23½) inches]
I made an Oslo hat from Petite Knit for my dad and while I was making it found a few hacks to make life (and knitting) easier! The hat has an interesting construction with a two-layer brim, making it extra warm. The pattern directs you turn the brim over and seam it down, which is the kind of work I find a bit tedious, so I made a few changes (see video):
I used a single strand of Double Knitting weight Yarn (the pattern uses two strands of a fingering weight … an easy substitution!)
I used a provisional cast-on (I prefer the crochet cast-on)
When I was finished knitting the brim I picked up the provisional cast-on, put it on a spare circular needle, folded the brim in two and knitted the stitches from both needles at the same time.
Size
XS (S) M (L)
approx: baby (junior/woman) woman (man)
head circumference of approximately: 47-50 (50-55) 55-59 (59-62) cm OR [18½-19¾ (19¾-21¾) 21¾-23¼ (23¼-24½) inches]
Materials
I used Sandnes Garn Double Sunday for the project. It’s a soft, springy 100% merino wool and I think it was perfect for the project. I made the largest size (which was pretty big) and used about 120g/260m. My father wanted grey, but there are actually a pile of gorgeous colours in this yarn, including lots of neutrals, lots of subtle Scandinavian colours, and lots of brights that POP!
Drops Alpaca: 3 to 4 skeins (2 strands held together)
Mohair Variation
There’s also a second version of this pattern knit with a strand of fingering weight yarn paired with a lace weight mohair. If you’re into that kind of thing you could pair the following:
Double Sunday is a favourite of PetiteKnit, to the extent where she’s collaborated with the yarn company and added her own palette of colours. Double Sunday is a soft, 100% merino wool, non-superwash double knit weight yarn (3.5mm to 4mm needles). It works up beautifully on its own, or try holding it with a kid-mohair like Drops Kid Silk (see pictures below for colour combinations … you’ll also find them on our website for both products) or a brushed alpaca like Drops Brushed Alpaca & Silk to give it a halo St. Peter would envy. While the ball band says to hand wash, the word on the street is that you can machine wash this yarn on a ‘wool cycle’. No matter what, always wash your hand knits in a delicate bag on delicate so they don’t abrade!
The name is an invitation to embrace the inner rebel and go for a color that truly speaks to you, that could either be a bright pop of color to help you nudge yourself out of your color comfort zone. Or, maybe you’re really craving a toned down color in a soft beige or cream but are hesitant because you always choose the same shades for your projects – well this is the time to listen to whatever speaks to your color loving heart and follow that intuition all the way!
The beanie is worked bottom up on 4 mm (US6) needles with one strand of merino together with one strand of silk mohair to give it a subtle fuzzy sheen.
This little pop-over vest will definitely keep you warm in cool weather! It’s worked holding one strand of kid-mohair with a strand of merino, making it light, airy, and soft.
Size
The Novice Slipover is designed to have approx. 17 cm [6¾ inches] of positive ease, meaning it is designed to be 17 cm [6¾ inches] larger in circumference than your bust measurement. Before beginning your project, measure yourself to determine which size will fit you best. For example, if you measure 90 cm [35½ inches] around your bust (or around the widest part of your upper body) you should knit a size S. A size S sweater has a bust circumference of 107 cm [42¼ inches], which in the given example would give you 17 cm [6¾ inches] of positive ease.
Is it named after the music artist Moby …. I doubt it, but I WISH!
In case the knitting inspiration isn’t already reward enough, here’s a great, TRUE, story from Canadian-famous CBC Radio personality Jonathan Goldstein about Moby (the artist, not the sweater or the whale) …. listenHERE.
The Moby Sweater is worked from the top down in a texture and cable pattern. First the back yoke is worked and shaped using short rows to form the slope of the shoulders. After this, stitches are picked up and knitted for each shoulder, which are then joined to form the front yoke. The front and back yoke are joined to form the body, which is worked straight down in the round. The sleeves are worked in the round on double-pointed needles or on a circular needle using the Magic Loop technique. Finally, stitches are picked up at the neckline to work a ribbed edge, which is then folded over towards the inside to form a double neckband, which is closed by knitting the stitches together with the pick-up edge.
Knit a swatch to determine which needle size you need to achieve the correct gauge – note that this can vary from yarn to yarn. Take care to wash the swatch before measuring, as the texture pattern can grow with wash.
Size
The Moby Sweater is designed to have approx. 15-20 cm [6-8 inches] of positive ease, meaning it is designed to be approx. 15-20 cm [6-8 inches] larger in circumference than your bust measurement. Before beginning your project, measure yourself to determine which size will fit you the best. For example, if you measure 90 cm [35½ inches] around your bust (or around the widest part on your upper body) you should knit a size S. A size S sweater has a bust circumference of 106 cm [41¾ inches] which in the given example would give you 16 cm [6¼ inches] of positive ease.
The Champagne Cardigan is worked from the top down with raglan increases on the yoke and a deep V-neck. The neckline of the cardigan is shaped with short rows by raising the back of the neck. The button plackets are worked in double knitting with buttonholes along the right side.
Size
The Champagne Cardigan has an oversize fit and is designed to have approx. 28 cm [11 inches] of positive ease, meaning it is designed to be 28 cm [11 inches] larger in circumference than your bust measurement. The sizes XS (S) M (L) XL (2XL) 3XL (4XL) 5XL are designed to fit a bust circumference of 80-85 (85-90) 90-95 (95-100) 100-110 (110-120) 120-130 cm (130-140) 140-150 cm [31½-33½ (33½-35½) 35½-37½ (37½-39½) 39½-43¼ (43¼-47¼) 47¼-51¼ (51¼-55) 55-59 inches].
Before beginning your project, measure yourself to determine which size to knit. For example, if you measure 106 cm [41¾ inches] around your bust (or around the widest part of your upper body) you should knit a size XL. A size XL sweater has a bust circumference of 134 cm [52¾ inches] which in the given example would give you 28 cm [11 inches] of positive ease.
The Hipster Hat is worked bottom-up in a 2×2 rib stitch. The bottom has a folded edge of about 6 (6) 8 (8) cm [2¼ (2¼) 3¼ (3¼) inches] (you can do a double folded edge if you knit the hat extra-long, but bear in mind that this will require more yarn than suggested). The decreases at the top of the head are done by working 2 sts together on each side of two knit sts a total of 4 times across the round. The Hipster Hat can be knit a bit long for it to get a little “hipster top” or to a length where it fits your head snuggly. The Hipster Hat is for both men and women.
Size
baby (child) woman (man)
head circumference of approximately: 45-48 (48-53) 53-57 (57-60) cm [17¾-19 (19-20¾) 20¾-22½ (22½-23½) inches]
The Oslo Hat is worked in two strands of yarn held together from the bottom up in stockinette stitch. The first part of the hat is worked on a 40 cm 16 inches circular needle, while the top of the hat is worked either on double-pointed needles or on a circular needle using the Magic Loop technique.
Size
XS (S) M (L) the approx. equivalent to baby (junior/woman) woman (man)
head circumference of approximately: 47-50 (50-55) 55-59 (59-62) cm [18½-19¾ (19¾-21¾) 21¾-23¼ (23¼-24½) inches]
Hanko has a boxy and relaxed fit that is effortless to wear and style in many different ways. It is my take on the classic Breton stripe style, but with a few little twists such as the two-colour stripes, dropped shoulder line and wide sleeves. Did you also notice the two-colour tubular bind off at the hem and the cuffs?
Hanko is knitted seamlessly top-down. The neckline is folded double, and the top of the back is shaped with German short rows to improve the fit around the neck. The shoulders are sloped and worked by increasing stitches along the shoulder line. After finishing the increases the front and back are separated and knitted separately to create the sleeve openings. After that, the pieces are joined again in the round and worked seamlessly down to the hem. Lastly, stitches are picked up around the sleeve openings and worked in the round. You can easily try the Hanko pullover on as you knit it and adjust the measurements to your own body measurements.
Hanko got its name after the small seaside town in Finland. The town of Hanko is a popular summer destination with beautiful beaches, marinas and old wooden villas dating back to the 19th century.
Size
This garment is supposed to be an oversized fit and features a positive ease of 25 cm / 10 inches.
The Marseille Sweater is worked from the top down. First, the back yoke is worked back and forth, while the shoulder slope is created by working short rows for a good fit. After this, each shoulder is worked back and forth separately with short row shaping. Then, the shoulders are joined to form the front. The front and back are worked separately and joined at the bottom of the armholes, and then the body is worked in the round on a circular needle. The sleeves are worked from stitches that are picked up and knitted along the armholes and are shaped using short rows. The sleeves are worked in the round on a circular needle and double-pointed needles or using the Magic Loop technique. The neck edge is worked from stitches that are picked up and knitted along the neckline, it is then folded double and knitted together. The Marseille Sweater is worked with stripes, the placements of which are described in the pattern.
Size
The Marseille Sweater is designed to have approx. 25 cm [9¾ inches] of positive ease, meaning it is designed to be 25 cm [9¾ inches] larger in circumference than your bust measurement. Before beginning your project, measure yourself to determine which size to knit. For example, if you measure 90 cm [35½ inches] around your bust (or around the widest part of your upper body) you should knit a size S. A size S sweater has a bust circumference of 115 cm [45¼ inches], which in the given example would give you 25 cm [9¾ inches] of positive ease.
Designed to fit a bust circumference of 80-85 (85-90) 90-95 (95-100) 100-110 (110-120) 120-130 cm (130-140) 140-150 cm [31½-33½ (33½-35½) 35½-37½ (37½-39½) 39½-43¼ (43¼-47¼) 47¼-51¼ (51¼-55) 55-59 inches].
The Technicolor Tote Bag is worked from the bottom up in a slipped stitch pattern. The bag is worked in three strands of yarn held together throughout, and the gradual transitions between colors are achieved by continuously changing between the different colors held together (don’t worry, the color changes are thoroughly described in the pattern and the pattern is supported with youtube videos). Work the bag in your favorite colors and either meticulously change colors as the pattern dictates or use the description in the pattern as a guide and inspiration and create your own interpretation of the Technicolor Tote Bag.
This project also makes a GORGEOUS cushion …. see below for a beautiful picture.
STASHBUSTING?
This project is of course ideal for stash-busting, but the designer hasn’t given actual yardage amounts in the pattern, just suggestions for the number of balls required. I explored the finished projects and found a few people who had generously entered their accurate yarn totals, and it looks like you’ll need a total of 700 to 750m (900m on the outside) of DK weight yarn. A few projects say they used about 400g of yarn.
SIZE
Size: One size
Width: 34 cm [13½ inches]
Height: approx. 38 cm [15 inches]
COLOUR
How do the colours work? You’ve got a few different shades working together to create a harmonious composition:
C1: A medium colour that attracts the eye (royal blue was used in the original) C2: A dark colour (dark brown was used in the original) C3: A light neutral (ecru/light beige was used in the original) C4: A medium-light neutral (camel was used in the original) C5: A bright colour that POPS! (bright orange was used in the original)
I absolutely LURV Anmarkar’s Technicolor cushions!!!! What a brilliant and simple statement piece …. any sofa or chair would be lucky to be home to something like this.
Looking for a larger bag? Look no further than the Petite Knit Technicolor Shopper! (I think this post is already long enough, just click on the picture or the link above to find all the details for the project.)
We recently received a shipment of a new staple yarn, Sandnes Garn Double Sunday. Double Sunday is a favourite of PetiteKnit, to the extent where she’s collaborated with the yarn company and added her own palette of colours. Double Sunday is a soft, 100% merino wool, non-superwash double knit weight yarn (3.5mm to 4mm needles). It works up beautifully on its own, or try holding it with a kid-mohair like Drops Kid Silk or a brushed alpaca like Drops Brushed Alpaca & Silk to give it a halo St. Peter would envy. While the ball band says to hand wash, the word on the street is that you can machine wash this yarn (I’ll whip up a swatch and throw it in my next load). No matter what, always wash your hand knits in a delicate bag on delicate so they don’t abrade!
The Hipster Hat is worked bottom-up in a 2×2 rib stitch. The bottom has a folded edge of about 6 (6) 8 (8) cm [2¼ (2¼) 3¼ (3¼) inches] (you can do a double folded edge if you knit the hat extra-long, but bear in mind that this will require more yarn than suggested). The decreases at the top of the head are done by working 2 sts together on each side of two knit sts a total of 4 times across the round. The Hipster Hat can be knit a bit long for it to get a little “hipster top” or to a length where it fits your head snuggly. The Hipster Hat is for both men and women.
Size
baby (child) woman (man)
head circumference of approximately: 45-48 (48-53) 53-57 (57-60) cm [17¾-19 (19-20¾) 20¾-22½ (22½-23½) inches]
The Oslo Hat is worked in two strands of yarn held together from the bottom up in stockinette stitch. The first part of the hat is worked on a 40 cm 16 inches circular needle, while the top of the hat is worked either on double-pointed needles or on a circular needle using the Magic Loop technique.
Size
XS (S) M (L) the approx. equivalent to baby (junior/woman) woman (man)
head circumference of approximately: 47-50 (50-55) 55-59 (59-62) cm [18½-19¾ (19¾-21¾) 21¾-23¼ (23¼-24½) inches]
The Champagne Cardigan is worked from the top down with raglan increases on the yoke and a deep V-neck. The neckline of the cardigan is shaped with short rows by raising the back of the neck. The button plackets are worked in double knitting with buttonholes along the right side.
Size
The Champagne Cardigan has an oversize fit and is designed to have approx. 28 cm [11 inches] of positive ease, meaning it is designed to be 28 cm [11 inches] larger in circumference than your bust measurement. The sizes XS (S) M (L) XL (2XL) 3XL (4XL) 5XL are designed to fit a bust circumference of 80-85 (85-90) 90-95 (95-100) 100-110 (110-120) 120-130 cm (130-140) 140-150 cm [31½-33½ (33½-35½) 35½-37½ (37½-39½) 39½-43¼ (43¼-47¼) 47¼-51¼ (51¼-55) 55-59 inches].
Before beginning your project, measure yourself to determine which size to knit. For example, if you measure 106 cm [41¾ inches] around your bust (or around the widest part of your upper body) you should knit a size XL. A size XL sweater has a bust circumference of 134 cm [52¾ inches] which in the given example would give you 28 cm [11 inches] of positive ease.
Hanko has a boxy and relaxed fit that is effortless to wear and style in many different ways. It is my take on the classic Breton stripe style, but with a few little twists such as the two-colour stripes, dropped shoulder line and wide sleeves. Did you also notice the two-colour tubular bind off at the hem and the cuffs?
Hanko is knitted seamlessly top-down. The neckline is folded double, and the top of the back is shaped with German short rows to improve the fit around the neck. The shoulders are sloped and worked by increasing stitches along the shoulder line. After finishing the increases the front and back are separated and knitted separately to create the sleeve openings. After that, the pieces are joined again in the round and worked seamlessly down to the hem. Lastly, stitches are picked up around the sleeve openings and worked in the round. You can easily try the Hanko pullover on as you knit it and adjust the measurements to your own body measurements.
Hanko got its name after the small seaside town in Finland. The town of Hanko is a popular summer destination with beautiful beaches, marinas and old wooden villas dating back to the 19th century.
Size
This garment is supposed to be an oversized fit and features a positive ease of 25 cm / 10 inches.
The Marseille Sweater is worked from the top down. First, the back yoke is worked back and forth, while the shoulder slope is created by working short rows for a good fit. After this, each shoulder is worked back and forth separately with short row shaping. Then, the shoulders are joined to form the front. The front and back are worked separately and joined at the bottom of the armholes, and then the body is worked in the round on a circular needle. The sleeves are worked from stitches that are picked up and knitted along the armholes and are shaped using short rows. The sleeves are worked in the round on a circular needle and double-pointed needles or using the Magic Loop technique. The neck edge is worked from stitches that are picked up and knitted along the neckline, it is then folded double and knitted together. The Marseille Sweater is worked with stripes, the placements of which are described in the pattern.
Size
The Marseille Sweater is designed to have approx. 25 cm [9¾ inches] of positive ease, meaning it is designed to be 25 cm [9¾ inches] larger in circumference than your bust measurement. Before beginning your project, measure yourself to determine which size to knit. For example, if you measure 90 cm [35½ inches] around your bust (or around the widest part of your upper body) you should knit a size S. A size S sweater has a bust circumference of 115 cm [45¼ inches], which in the given example would give you 25 cm [9¾ inches] of positive ease.
Designed to fit a bust circumference of 80-85 (85-90) 90-95 (95-100) 100-110 (110-120) 120-130 cm (130-140) 140-150 cm [31½-33½ (33½-35½) 35½-37½ (37½-39½) 39½-43¼ (43¼-47¼) 47¼-51¼ (51¼-55) 55-59 inches].
The chart is designed to make the knitting flow, even though the cables are placed closely together. For this reason, all the cables are knitted on the same row, followed by 3 simpler rows. The cable pattern is easy to memorize and not too difficult to knit, even if you haven’t knit cables before. The mittens are knitted bottom-up and the thumbs are knitted at the end, using the ‘’afterthought’’ method.
Size
The mittens are quite stretchy in width, and they will therefore fit a wide range of sizes. The length is adjusted by knitting fewer or more repeats.
S (Small, Womens), L (Large, Womens)
Length: S – 18.5 cm, L – 21 cm (measured without the cuff). Fits hands with palm length S – 16.5-18 cm, L – 18.5-20.5 cm (measured from the wrist to the tip of the longest finger).
Circumference: S and L – 17.5 cm (without stretching, corresponds to 8.5-9 cm width). The circumference is the same in both sizes and can be stretched comfortably to a circumference of 22 cm. The mittens will fit a palm measured around the knuckles’ circumference (without the thumb) of 16 to 22 cm.
