Jethro is a “throw it on and run out the door” kind of cardi …. my favorite for spring, and like the author says in her pattern blurb, I’m not over granny sweaters! It’s worked in a combination of crocheted granny squares (a great simple skill for inexperienced crocheters) and then the sleeves and ribbing are knitted, creating a really pretty, finished look.
Jethro is designed with a DK weight yarn, so it’s not too light, not too heavy … perfect for variable spring weather. I’m inclined to make it with a springy merino wool, like Sandnes Garn Double Sunday, but it would be equally awesome made with a blend like Berroco Vintage Baby and Berroco Vintage DK (which can be used interchangeably).
The desinger has graciously created a Youtube Playlist with support for skills.
Size
The sizes given are the actual finished full chest measurement of the garment. Choose a size that corresponds to 30-43 cm / 12-17” larger than your upper bust measurement, or the size that will give you the amount of ease you like. I recommend wearing this drop-shoulder style with a lot of positive ease.
For the Granny Squares you’ll needa total of: 615 (747, 893, 1348, 1385, 1503) metres or 675 (820, 980, 1480, 1520, 1650) yards.
NOTE: The joining round, which is shown in the picture in the main colour, is included in the yardage for the granny squares. If you are planning to make multicoloured granny squares with the joining round worked in your main colour (like the one in the picture), approximately 210 (227, 250, 410, 328, 365) metres or 230 (250, 275, 450, 360, 400) yards of your “granny square” yardage will be in your main colour.
For the sleeves and ribbing you’ll need: 227 (273, 328, 373, 419, 455) metres or 250 (300, 360, 410, 460, 500) yards of the main colour.
Thank you Erica for knitting up this beautiful shawly/scarfy thingy, the Sophie Shawl by PetiteKnit. It’s a great design because it’s deeper in the middle, where you need more coverage, but narrower at the edges, where you don’t, making it a really wonderful fall/winter/spring garment! It’s a simple knit, mostly garter stitch with an attached i-cord edge that keeps it looking pretty and elegant (a simple technique, definitely not a dealbreaker if you’ve never done it).
I don’t know why I chose the purple … it was a momentary intuitive choice. Am I manifesting a colour trend? If you have any insight, please let me know!
Notes
We made the size medium, but used a bit more yarn than the pattern required and we had to dip into an extra ball of mohair, so if I was to do it over again I’d just level up to a size Large.
Size
Our finished measurements (size M): 82″ (213cm) long from tip to tip, 14.5″ (37cm) deep at the middle):
Sizes: S (M) L
Length from tip to tip: approx. 170 (210) 240 cm 67 (82¾) 94½ inches
Width at center: approx. 28 (34) 38 cm 11 (13½) 15 inches
The Weekend Hat by Hiromi Nagasawa is a great little project for fall and winter! It’s a pretty cabled toque that can be worn with the brim turned up like a fisherman cap or turned down to make it slouchy, or knit half a brim for a true beanie.
Many thanks to Leslea for making this sample for us! It was her first try with cables and she did it with grace (if you haven’t tried cables yet they aren’t actually hard, they just look fancy).
Notes
The top has a fancy finishing technique but we didn’t bother with it. Instead we just decreased to 8 sts, broke the yarn and pulled tail through remaining sts. Easy-peasy!
Size
The pattern is one-size and based on our sample it should fit a medium to large size head (23″ to 24″)
To make the hat smaller you can either omit the two ribs at each side, or make it with a fingering weight yarn held with the mohair and 3mm/US2.5 & 3.5mm/US4 needles.
Length for short brim: 9” / 23 cm
Length for folded brim: 11.5” / 29.5 cm length (8.5” / 21.5 cm length with brim folded up)
The Stripe Hype Sweater is a great stash busting project where you can use up scrap yarns or combine your favourite colors in just the way you want. Also, knitting stripes makes this one a really quick project to complete because the curiosity of seeing how every next stripe will affect the overall look is highly addictive, and a lot of fun.The work begins by working the back flat, then stitches are picked up for the left and right front separately and worked flat. The back and front are then joined together and the body is worked in the round. Stitches are picked up for the sleeves and worked in the round and lastly stitches are picked up around the neckline and the collar is worked in a twisted rib stitch.
Length from back neck (excluding collar) to hem: 59 cm / 23.25” all sizes.
Sweater is designed to have 20-30 cm / 8-12” of positive ease. Choose a size that is 20-30 cm / 8-12” bigger than your bust circumference for a relaxed and slightly oversized look.
Sample in size M, model has a bust of approx. 87 cm / 34.25” and is 171 cm/ 5’6” tall.
If you’re between two sizes, I recommend choosing the bigger size.
The Stripe Hype dress is a relaxed dress that is the absolute perfect “just-throw-it-on” garment for any season. The dress has a dropped shoulder and a boxy fit which makes it modern and easy to knit.
You can customize it to your exact preferences by choosing your favourite colours: go all in and use multiple colours for a really fun and playful vibe (a great option for using up scrap yarns in your stash), or choose just a few colours in a more toned down colour palette for a more classical look. You can also knit it all in one colour.
The dress is worked top down. The work begins by working the back flat, then stitches are picked up for the left and right front separately and worked flat. The back and front are then joined together and the body is worked in the round while increasing stitches along both side seams around the waist and hips for a slight A-line shape. Stitches are picked up for the sleeves and worked in the round and lastly stitches are picked up around the neckline and the collar is worked in a rib stitch.
The Easy Garter Scarfy Wrap is the brainchild of my friend Jo, and I’m very grateful that she came up with this simple solution because it’s GREAT! This wrap drapes like a big scarf, but is also equally wearable as a little wrap. The pattern is almost totally brainless; it’s a great second or third project for a beginner knitter, but it also works equally well for more experienced knitters hanging out on the patio with a beer or a cocktail.
You can choose one of our colour combinations, put together something from your own inspiration, or combine the two and use our palette as a jumping-off point and curate your own perfect colour experience. We’re happy to help you any way we can. We stock the yarn, Sandnes Garn Double Sunday, all year round.
This kit can be used for any kind of scarf or wrap project. 4 balls of Sandnes Garn Double Sunday is enough for a conventional 6″ wide double-wrapped scarf (about 6 feet long (of 1.8m). For a standard triangular shawl (like Boneyard) you’ll need 5 skeins or more.
Sandes Garn Double Sunday is a 100% merino, DK weight yarn (a mainstay of designer PetiteKnit). Double Sunday is an affordable merino from Norway that is NOT superwash, but can go in the machine on delicate (see below), or just do a simple no-rinse hand-wash in Eucalan or Soak wash.
Sandnes Garn’s supplier has guaranteed that the wool does not come from sheep that have been subjected to mulesing. For machine washing, the manufacturer recommends that all wool garments be washed separately on a wool program, to ensure the gentlest treatment. Due to the unique absorbency of the merino wool, it is important to centrifuge hand-knitted garments well before drying them on a flat surface, preferably on top of a towel. They do not suggest using a laundry bag when washing hand-knitted wool garments, as this creates friction that can cause the garment to felt.
The base pattern calls for 250g (or about 500m) of DK weight yarn, but it’s easy to make your scarfy-wrap bigger … you just keep knitting and it’ll keep growing (where there was an opportunity I expanded the colour palettes offering to 6 and 7 ball colour combos). There’s enough yarn in the basic 5 colour combo for a nice sized scarf (at least 7 inches wide x 6 feet long). If you want to use our colour palettes as guidance and want to make a sizeable gradient wrap I suggest getting two kits.
Skill Level
Beginner (a great project after you’ve made a scarf)
We chose two colours that are close together but not exactly the same, which creates some depth of colour and vibrance in the finished piece. I’m including some colour combinations below.
Modifications
To make an adult size large (23″ to 24″ head circumference): 1. cast on 96 sts, 2. knit an extra inch before you begin the decreases (begin decreases at 9”); 3. begin the decrease section by working in 1×1 rib pattern for 21 sts, P3tog, then continue in the same logic.
If you want a folded brin knit for an extra 2.5″ to 3″ from cast-on edge
Size
One Size (fits medium-sized head: for a large see modifications above/in pattern)
14.5” circumference (before blocking and unstretched), 10.25” height
The Stripe Hype Sweater is a great stash busting project where you can use up scrap yarns or combine your favourite colors in just the way you want. Also, knitting stripes makes this one a really quick project to complete because the curiosity of seeing how every next stripe will affect the overall look is highly addictive, and a lot of fun.The work begins by working the back flat, then stitches are picked up for the left and right front separately and worked flat. The back and front are then joined together and the body is worked in the round. Stitches are picked up for the sleeves and worked in the round and lastly stitches are picked up around the neckline and the collar is worked in a twisted rib stitch.
Length from back neck (excluding collar) to hem: 59 cm / 23.25” all sizes.
Sweater is designed to have 20-30 cm / 8-12” of positive ease. Choose a size that is 20-30 cm / 8-12” bigger than your bust circumference for a relaxed and slightly oversized look.
Sample in size M, model has a bust of approx. 87 cm / 34.25” and is 171 cm/ 5’6” tall.
If you’re between two sizes, I recommend choosing the bigger size.
The Stripe Hype dress is a relaxed dress that is the absolute perfect “just-throw-it-on” garment for any season. The dress has a dropped shoulder and a boxy fit which makes it modern and easy to knit.
You can customize it to your exact preferences by choosing your favourite colours: go all in and use multiple colours for a really fun and playful vibe (a great option for using up scrap yarns in your stash), or choose just a few colours in a more toned down colour palette for a more classical look. You can also knit it all in one colour.
The dress is worked top down. The work begins by working the back flat, then stitches are picked up for the left and right front separately and worked flat. The back and front are then joined together and the body is worked in the round while increasing stitches along both side seams around the waist and hips for a slight A-line shape. Stitches are picked up for the sleeves and worked in the round and lastly stitches are picked up around the neckline and the collar is worked in a rib stitch.
Satawal is cropped tee with lace pattern around the boat neck, which looks a bit like Macramé texture. You can use various weights of yarn, from fingering weight for airy and transparent texture to worsted weight yarn for mid season garment (I think Berroco Modern Cotton would be perfect).
The pattern is worked seamlessly from the top down. Lace pattern for yoke is worked in the round with increases at the both right and left shoulders, then the body is divided into the front and the back and worked flat separately to the underarm, where they are joined again. The lower body is knitted in one piece in the round. Sleeve stitches are picked up along armholes and worked in the round.
The Audrey Top is worked bottom-up. The body is worked in the round in stockinette stitch, then the work is divided for front and back, and each section is worked back and forth in stockinette stitch with decreases along the sides. The straps are worked as an i-cord. The pattern calls for a tension is 20 sts, perfect for a soft, silky summer cotton blend like Berroco Modern Cotton.
designed to have approx. 0-5 cm [0-2 inches] of positive ease, meaning it is designed to be approx. 0-5 cm [0-2 inches] larger in circumference than your bust measurement. Measure yourself before beginning your project, to determine which size will fit you the best. For example, if you measure 89 cm [35 inches] around your bust (or around the widest part of your upper body) you should knit a size S. A size S top has a bust circumference of 90 cm 35½ inches which in the given example would give you 1 cm ½ inch of positive ease.
The model in the photos is wearing a size XXS and has a bust circumference of 78 cm [30¾ inches] and is 164 cm [approx. 5 feet 4 inches] tall.
The top in the photo has 2 cm ¾ inch of positive ease.
Havin was originally designed without sleeves, as a slip over … just a great companion for those lovely summer nights. While working on the second sample, the designer thought she would like to try out short sleeves … and yay! it worked well and she really liked the look. This little success was leading to her third sample and LONG sleeves all in one. Havin will make a beautiful summer top, a super cute tee or a cool pullover … a pattern to use all year round.
Havin is worked seamlessly from the top down. Firstly, increases are worked on both RS and WS rows to the final shoulder width. Then both the front and the back are worked (separately) flat to underarm. At underarm both front and back are joined to work the tapered body top down in the round to the bottom. There are two finishing options (ribbing or I-Cord) for the body to choose from. Optional short or long sleeves can be worked by picking up stitches around the arm opening and working them top down in rounds. Optional neck finishing is worked last.
Just in time for spring and International Women’s Day, Erica (goddess of the yarn & needles) finished a Hipster Hat from Petite Knit in one of the gorgeous new colours of Sandnes Garn Double Sunday (colour 4626). The yarn is soft and spongy with lots of body and memory and keeps the shape of the hat & the ribbing beautifully! I steam-blocked it really easily it and it just popped into its final shape. The colour is delicious … I really needed a hit of colour for Spring!!!!
Thank you to all the women who make all the things happen …. I am grateful.
The Hipster Hat
The Hipster Hat is worked bottom-up in a 2×2 rib stitch. The bottom has a folded edge of about 6 (6) 8 (8) cm [2¼ (2¼) 3¼ (3¼) inches] (you can do a double folded edge if you knit the hat extra-long, but bear in mind that this will require more yarn than suggested). The decreases at the top of the head are done by working 2 sts together on each side of two knit sts a total of 4 times across the round. The Hipster Hat can be knit a bit long for it to get a little “hipster top” or to a length where it fits your head snuggly. The Hipster Hat is for both men and women.
Size
baby (child) woman (man)
head circumference of approximately: 45-48 (48-53) 53-57 (57-60) cm [17¾-19 (19-20¾) 20¾-22½ (22½-23½) inches]
I made an Oslo hat from Petite Knit for my dad and while I was making it found a few hacks to make life (and knitting) easier! The hat has an interesting construction with a two-layer brim, making it extra warm. The pattern directs you turn the brim over and seam it down, which is the kind of work I find a bit tedious, so I made a few changes (see video):
I used a single strand of Double Knitting weight Yarn (the pattern uses two strands of a fingering weight … an easy substitution!)
I used a provisional cast-on (I prefer the crochet cast-on)
When I was finished knitting the brim I picked up the provisional cast-on, put it on a spare circular needle, folded the brim in two and knitted the stitches from both needles at the same time.
Size
XS (S) M (L)
approx: baby (junior/woman) woman (man)
head circumference of approximately: 47-50 (50-55) 55-59 (59-62) cm OR [18½-19¾ (19¾-21¾) 21¾-23¼ (23¼-24½) inches]
Materials
I used Sandnes Garn Double Sunday for the project. It’s a soft, springy 100% merino wool and I think it was perfect for the project. I made the largest size (which was pretty big) and used about 120g/260m. My father wanted grey, but there are actually a pile of gorgeous colours in this yarn, including lots of neutrals, lots of subtle Scandinavian colours, and lots of brights that POP!
Drops Alpaca: 3 to 4 skeins (2 strands held together)
Mohair Variation
There’s also a second version of this pattern knit with a strand of fingering weight yarn paired with a lace weight mohair. If you’re into that kind of thing you could pair the following:
